Спецификация Extron Quantum Connect:
NOTE: The Quantum Connect has eight slots for factory-installed input/output cards. Each slot can accomodate up to 12 S-video or composite video inputs, 2 analog RGB or component video inputs, 2 DVI inputs, 2 HDMI inputs, 2 3G/HD/SD-SDI inputs, 2 RGB or DVI outputs, or 2 HDMI outputs.
The system is configured at the factory at the time of order. The I/O cards are not available separately for upgrades.
Video input — composite or S-video input:
Number/signal type 12 S-video, composite video
Connectors 2 female 26-pin HD (included adapter allows input on 24 female BNC connectors)
Nominal level 1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
Minimum/maximum levels Analog: 0.1 V to 2.0 Vp-p with no offset
Impedance 75 ohms
Horizontal frequency 15 kHz
Vertical frequency 50 Hz, 59.94 Hz
Video input — RGB or component video input:
Number/signal type 2 analog VGA-WUXGA RGBHV, RGsB, HDTV, component video
Connectors 2 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and for G of RGsB
0.7 Vp-p for RGB and for Pr and Pb of component video
Minimum/maximum levels Analog: 0.3 V to 2.0 Vp-p with no offset
Impedance 75 ohms
Horizontal frequency 15 kHz to 100 kHz
Vertical frequency 50 Hz to 75 Hz
Resolution range 640x480 to 1920x1200, NTSC, PAL, 480p, 576p, 720p, 1080i, 1080p
Video input — DVI input:
Number/signal type 2 digital VGA-WUXGA RGB, single link DVI
Connectors 2 female DVI-I (analog signals are not supported)
Horizontal frequency 31 kHz to 100 kHz
Vertical frequency 24 Hz to 85 Hz
Resolution range 640x480 to 1920x1200, 480p, 576p, 720p, 1080i, or 1080p
Formats RGB digital video
Standards DVI 1.0
Video input — HDMI input:
NOTE: Appropriate HDMI to DVI cables or adapters are required for DVI signal input/output.
Number/signal type 2 single link HDMI (or DVI*)
Connectors 2 female HDMI type A (analog signals are not supported)
Signal type 2 Single link HDMI (or DVI*)
Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI standard)
EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. Factory or custom EDID tables are user selectable.
HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
Horizontal frequency 31 kHz to 100 kHz
Vertical frequency 24 Hz to 85 Hz
Resolution range 640x480 to 1920x1200, 480p, 576p, 720p, 1080i, or 1080p
Standards DVI 1.0, HDMI, HDCP
Equalization Automatic
Video input — SDI input:
Number/signal type 2 3G/HD/SD-SDI
Connectors 2 female HD-BNC (HD-BNC to female BNC adapters are included.)
Data rates 270 Mbps to 2.97 Gbps
Horizontal frequency 15 kHz to 100 kHz
Vertical frequency 23.98 Hz to 60 Hz
Resolution range 480i, 576i, 720p, 1080i, or 1080p
Formats YCbCr digital component video
Return loss <-15 dB @ 1 MHz to 1.5 GHz
Input cable equalization Automatic for up to -30 dB of cable loss
3G-SDI 60 meters (200 feet) using Extron RG6 cable
45 meters (150 feet) using Extron RG59 cable
HD-SDI 120 meters (400 feet) using Extron RG6 cable
90 meters (300 feet) using Extron RG59 cable
SDI 150 meters (500 feet) using Extron RG6 cable
120 meters (400 feet) using Extron RG59 cable
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable.
Standards SMPTE 259M-C, SMPTE 292M, SMPTE 424M
Video processing — inputs:
Maximum data rate DVI and HDMI inputs: 4.95 Gbps (1.65 Gbps per color)
SDI inputs: 2.97 Gbps
Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (S-video, composite video),
205 MHz standard (RGB, component video), 165 MHz standard (DVI and HDMI)
Colors 16.78 million
Video processing — outputs:
Maximum data rate 4.95 Gbps (1.65 Gbps per color)
Digital sampling 24 bit, 8 bits per color, 165 MHz standard
Colors 16.78 million
Video output — RGB or DVI output:
Number/signal type 2 scaled RGBHV or single link DVI
Connectors 2 female DVI-I (analog and digital signals are both active)
Nominal level 0.7 Vp-p for RGB
Minimum/maximum levels 0.0 V to 1.0 Vp-p
Impedance 75 ohms
Vertical frequencies 50 Hz, 60 Hz
Scaled resolution 640x4801,2, 800x6001,2, 848x4801,2, 1024x7681,2, 1152x8701,2, 1280x7681,2, 1280x8001,2, 1280x10241,2, 1360x7681,2, 1366x7681,2, 1440x9001,2, 1400x10501,2, 1408x10501,2, 1600x12001,2, 1680x10501,2, 1920x12001,2
HDTV: 720p1,2, 1080p1,2
1 = at 50 Hz, 2 = at 60 Hz
Standards DVI 1.0
Video output — HDMI output:
Number/signal type 2 scaled single link HDMI (HDCP compliant)
Connectors 2 female HDMI type A
Vertical frequency 50 Hz, 60 Hz
Scaled resolutions 640x4801,2, 800x6001,2, 848x4801,2, 1024x7681,2, 1152x8701,2, 1280x7681,2, 1280x8001,2, 1280x10241,2, 1360x7681,2, 1366x7681,2, 1440x9001,2, 1400x10501,2, 1408x10501,2, 1600x12001,2, 1680x10501,2, 1920x12001,2
HDTV: 720p1,2, 1080p1,2
1 = at 50 Hz, 2 = at 60 Hz
Standards DVI 1.0, HDMI, HDCP
Sync:
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input type RGBHV, RGsB, bi-level or tri-level component video
Output type RGBHV
Input level 2.75 V to 5.0 Vp-p for RGBHV
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
Output level 2.4 Vp-p for RGBHV
Input impedance 2.2k ohms for H and V
Output impedance 2.2k ohms
Max. input voltage 5 Vp-p
Polarity Positive or negative
Control/remote — processor/decoder/scaler:
Ethernet ports 1 female RJ-45 connector for control, networked
Ethernet data rate 10/100Base-T, half/full duplex with autodetect
Ethernet protocol IP, TCP
Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = not supported
Storage 80 GB (1 IDE drive)
Internal operating system Microsoft® Windows® XP® embedded
Program control Extron Quantum Connect control/configuration software for Windows
NOTE: The operating system is hard-coded into the Quantum Connect and Windows updates are not required. The C drive, which contains the operating system, is write protected to prevent unauthorized access.
Control/remote — setup and troubleshooting:
Number/signal type 1 analog VGA-UXGA RGBHV local monitor, 2 USB, 1 PS/2 mouse and keyboard
Connectors 1 female 15-pin HD, 2 USB type A, 1 female PS/2 (6-pin mini DIN) (Breakout cable to 2 PS/2 connectors is included.)
USB standards USB 2.0, low speed
General:
Power supply Internal
Input: 100-240 VAC, 50-60 Hz
Power consumption 300-500 watts (varies with configuration)
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 85%, noncondensing
Operating: +35 to +95 °F (5 to +35 °C) / 10% to 85%, noncondensing
Cooling Fans, front to rear
Thermal dissipation 300-900 BTU/hr (varies with configuration)
Mounting
Rack mount Yes
Enclosure type Metal
Enclosure dimensions 7.0" H x 17.1" W x 19.3" D (4U high, full rack wide)
(17.8 cm H x 43.3 cm W x 49.0 cm D)
(Depth excludes connectors and handles. Width excludes built-in rack ears.)
Product weight Without boards: 36 lbs (16.3 kg)
Fully loaded: 41.5 lbs (18.8 kg)
Shipping weight Without boards: 47 lbs (21 kg)
Fully loaded: 53 lbs (24 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, FCC Class A
Environmental Complies with the appropriate requirements of RoHS, WEEE.
Warranty 3 years parts and labor